Key Features

• Patented Drop-Stop¬Æ wide-narrow tooth profile for minimised dropped chains
• Perfect for 1x setups
• Machined in-house at Wolf Tooth's HQ in Minnesota, USA

Compatibility

• These rings are for use with 110 BCD 5 arm cranksets.
• Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm (SRAM). When mounting, be sure the arrow on the chainring goes behind the crank arm.
• Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800
• Not compatible with Campagnolo CX10/11.
• Wolf Tooth's patented Drop-Stop¬Æ wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
• Chain Compatibility
  • 9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11-speed chains. They also work with 12 speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.
  • If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention
• Chainline - varies - these rings can be mounted in either the big or small ring position on double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
• Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position.
• Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting.