• Patented Drop-Stop¬Æ wide-narrow tooth profile for minimised dropped chains
• Perfect for 1x setups
• Machined in-house at Wolf Tooth's HQ in Minnesota, USA
• Beautiful anodised finish

Compatibility

• These rings fit on the Shimano XT M8000 and SLX M7000 1x or 2x cranksets.
• Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
• These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
• Wolf Tooth's patented Drop-Stop¬Æ wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
• For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
  • Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
  • If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).

• Chainline - 49mm
• Boost Crankset Chainline - 52 mm
• Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
• Ovality of 10% and timing of 112¬∞ after TDC (top dead centre)
• Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)