• Handmade in Minnesota, USA by Wolf Tooth
• Machined from 7075-T6 aluminium
• ED coated steel bolts included

Compatibility

• This is a spider for use with the Cannondale cranksets that have a removable spider
• Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth:
  • M9 (minus 9mm - standard dish towards the frame)
    • For use on standard (non-Ai offset) bikes
  • M4 (minus 4mm - Ai offset)
    • For use on Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes
    • For use on 2x Fat CAAD (a 166mm spindle)
  • M1 (minus 1mm - dished towards the frame)
    • For use on 1x Fat CAAD bikes (a 160mm spindle)
  • M1 (minus 1mm - dished towards the frame)
    • Cannondale cyclocross and road bikes (38T max CAMO chainring)
    • Ai cyclocross bikes with 155mm spindle (38T max CAMO chainring)
• CAMO mounting bolts can be purchased separately, but all the CAMO spiders come with stainless steel bolts if you don't order them.

Installation notes:

• You will be able to access all bolts without removing the spider
• Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.
• Be sure the bosses on the spider ""plug in"" to the chainring.
• Torque bolts only to 4-5 Nm and use blue Loctite thread locker