The all new FAZUA ENERGY 250 X battery combines light weight and optimal efficiency with a clean design. At 1.4 kg, it weighs just as much as a bottle of water and can be conveniently switched on and off via the FAZUA Remote bX* or Remote fX*. Removing the battery is no longer necessary for this. Fazua's proprietary BMS protects the battery from overcharging, overheating, undervoltage or short circuits.
*The wake-up function is possible with all FAZUA Remote bX and Remote fX from serial number 4211203001 onwards.
The Fazua Evation E-Bike Spare Charger charges the battery via a 2 ampere magnetic plug. The battery is fully charged after 3-4 hours. After 2 hours, however, 80% of the charge level has already been reached. As soon as the charger is connected to the power supply, its LED lights up green. As soon as the charger is connected to the battery, it shines red until the battery is fully charged.
¢ Cover for the down tube.
¢ Replaces the motor and battery unit.
¢ Conversion in one step.
¢ Storage space.
With the Fazua Evation E-Bike Downtube Cover your Fazua powered electric bike can be converted to a normal bike in seconds. The 0.4kg lightweight cover can be inserted into the down tube instead of the motor/battery unit. The interior can be used as a storage for your bike tour equipment (e.g. for a rain jacket). The 2-in-1 solution is an integral part of Fazua's product philosophy and reduces the total weight of your bicycle by 2.9kg when you dont need the power or want to store the bike without the power pack (roof rack transportation etc).
Bottom Bracket Cover
¢ Serves to protect the slots as well as the connectors of remote, speed sensor and light system.
¢ Can be installed without tools
The Bottom Bracket Cover is attached to the rear of the Bottom Bracket on the slots. It serves to protect the slots as well as the plugs of the remote, speed sensor and light system. The BB Plug Cover can be installed in the installed state of the bottom bracket without tools and is therefore ideal for retrofitting bike models that do not yet have their own cover installed.
Important: The cover is not absolutely necessary to ensure the functionality of the system.
The Charger is smaller, lighter and in addition cheaper than its predecessor. Due to its compact dimensions, the FAZUA charger is easy to transport. A second charger allows flexible charging in the office, garage or basement. The charger charges the battery via a magnetic plug with 2 amps. Thus the battery is fully charged after 3-4 hours. After 2 hours, however, 80% of the charge level is already reached. As soon as the charger is connected to the power, its LED lights up green. If one connects the Charger with the battery, the LED lights up red until the battery is fully charged.
Please note. The Fazua charger comes supplied with an EU plug. Please purchase the UK plug separately.
12V Connector Box
¢ Allows you to operate the lighting system remotely.
¢ Full compatibility with all evation remotes.
¢ Integration in the frame.
The 12V Connector Box allows you to switch the lights connected to the Fazua evation drive system on and off via the evation remote. Depending on the installation location, the box can be obtained in two cable lengths. 200mm for installation in the seat tube and 650mm for installation above the locker. Thereby your bike light uses the capacity of the FAZUA ENERGY 250 resp. ENERGY250X.
Installation only by qualified personnel otherwise there is a risk of loss of warranty!